FAQ
Have Any Questions?
Didn’t Find Your Question Here?
If your question isn’t listed, don’t worry! Contact us directly, and the team at Spark Edge Electric will be happy to assist you with all your electrical concerns.
To enhance your home’s electrical safety for children, consider installing tamper-resistant receptacles (TRRs), also known as child-safety outlets. These outlets feature a shutter mechanism that only opens when a two-pronged or grounded plug is inserted, preventing foreign objects from being inserted into a single slot. TRRs are a standard requirement in all newly constructed homes, making them an effective way to safeguard against electrical injuries.
An arc fault circuit interrupter (AFCI) is an advanced safety device designed to detect and monitor arcing conditions in electrical circuits. It can differentiate between harmless and hazardous arcs caused by overloads or short circuits, ensuring that dangerous arcs are prevented.
AFCIs are required for most residential receptacle circuits, and installing them in multiple rooms and circuits enhances home safety. Reach out to our team to evaluate your home’s electrical system and optimize safety with professional AFCI installation.
While outlet caps and sliding wall plates might seem like practical solutions, tamper-resistant receptacles (TRRs) are far safer. Caps can be easily removed by children, increasing the risk of electrical injuries. Sliding or shutter wall plates may lead to heat buildup and accidental arcing. For maximum safety, TRRs are a more reliable and effective choice.
To reset a tripped circuit breaker, locate your home’s electrical panel and find the breaker lever that is neither fully in the ON nor OFF position. Move the lever completely to the OFF position, then switch it back to ON. This should restore power after an overload. If the issue persists, contact Spark Edge Electric for a professional evaluation.
Circuits usually trip because of an overload, which occurs when too many appliances or devices are drawing power from the same circuit. Another common reason is a short circuit caused by damaged wiring or a faulty appliance. After resetting the breaker, reduce the electrical load on that circuit. If the issue continues, reach out to Spark Edge Electric for expert assistance.
It’s normal for a dimmer switch to heat up when operating at full capacity. Many dimmers are even designed with metal fins to help dissipate heat.
However, excessive heat can indicate an issue. Dimmer switches have a maximum wattage rating, and exceeding this limit can create a fire hazard. If your dimmer switches frequently feel too hot or you’re uncertain about the installation, contact Spark Edge Electric for a professional inspection.
Absolutely. Electrical surges can happen more than 20 times daily, with most being minor. However, larger surges have the potential to damage appliances and electronics both inside and outside your home. Surge protectors work by limiting the voltage that reaches electronic components, safeguarding devices like your refrigerator, furnace, stereo system, television, and more. Let Spark Edge Electric install a surge protector to ensure your home and appliances stay protected.
Flickering lights can happen for several reasons, such as loose connections, worn-out circuit breakers, or defective light bulbs. Start by replacing the bulb and trying a different brand. If the flickering persists, it could indicate a deeper issue. Contact Spark Edge Electric to have our electricians diagnose and resolve the problem.
A ground fault circuit interrupter (GFCI) is a specially designed outlet that protects against ground faults and short circuits. It detects even small electrical current leaks and immediately shuts off the power to prevent hazards. GFCIs are required by code in areas of the home where electricity and water may come into contact, such as kitchens, bathrooms, laundry rooms, basements, and pool areas. For proper GFCI installation, contact Spark Edge Electric.
Attempting to install electrical wiring yourself can be extremely dangerous if done incorrectly. Faulty installation can lead to serious risks, including electrical fires. For your safety, it’s always best to rely on licensed professionals like the team at Spark Edge Electric.
A generator provides a reliable backup power source during outages, ensuring your home or business continues to operate smoothly when unexpected power failures occur. For expert generator installation, trust Spark Edge Electric.
Yes, all of our electricians at Spark Edge Electric are fully licensed and certified professionals. We prioritize regular training to keep them knowledgeable about the latest technologies and safety standards, ensuring top-quality service for our clients.